Bút đo độ dẫn điện EC Hanna HI 98307-02

[duanchungcungoaigiaodoan]

Hệ thống quảng cáo SangNhuong.com

Bút đo độ dẫn điện EC Hanna HI 98307-02
Thiết bị đo độ dẫn điện
Hãng sinh sản: HANNA
Xuất xứ: Romania
Model: BL 983307-02
Pronto EC meter, resolution: 0.01 mS/cm Range: 0.00 to 9.99 mS/cm, 230V
Giá: Liên hệ 0977.459.400

>>>Máy đo độ dẫn điện Hanna
The HI 983307-02 conductivity meter is Hanna's reply to requests for accurate, affordable process monitoring with low maintenance.

This meter is supplied with a direct 2-pin probe and 2m cable with a ½" thread for flow-thru mounting. The probe has a temperature sensor to automatically compensate against temperature changes from 5 to 50°C.

In the measurement mode, a red LED will warn the user in the event the reading is outside of the alarm interval. A front trimmer allows manual calibration at 1 point. The electrical circuitry is tightly sealed inside the water resistant enclosure. EC can be installed anywhere quickly and easily with the casings moulded eye. The casing has been specially designed to sit out of the way and will not roll off a table. The 12 Vdc power supply allows continuous monitoring over extended periods of time.

>>>Hanna HI 98307-02
Product uses
Demineralised water
Deionised water

Key features
Water resistant
Continuous EC monitoring
Visual LED alarms

Supplied with
HI-7632/2 EC/TDS probe
Calibration screwdriver
12 VDC adapter and instructions

>>>Bút đo độ dẫn điện EC Hanna HI 98307-02


Range 0.00 to 9.99 mS/cm
Resolution 0.01 mS/cm
Accuracy ±2% F.S.
Calibration manual, 1 point through trimmer
Calibration Solution HI 70039P
Temperature Compensation automatic, 5 to 50°C (41 to 122°F) with ß=2%/°C
Setpoint 0.70 to 3.50 mS/cm
Alarm red LED (blinks when measurement differs from setpoint by:
±0.2 mS/cm
Probe HI 7632/2 with 2 m (6.6') cable and ½" thread
(included)
Power Supply 12 Vdc power adapter (included)
Environment 0 to 50°C (32 to 122°F); RH max 100%
Dimensions 86 x 110 x 43 mm (3.4 x 4.3 x 1.7")
Weight 215 g (7.6 oz.)