Chủ đề: 138,366, Bài gửi: 256,527, Thành viên: 100,825
Online: 0

Trở lại   Chợ thông tin In Ấn Việt Nam > Linh Tinh > Quảng cáo - Rao vặt

Trả lời
 
Công cụ bài viết Kiểu hiển thị
  #1  
Cũ 31-05-2013, 04:56 PM
kmibiz kmibiz đang online
Senior Member
 
Tham gia ngày: Dec 2012
Bài gửi: 4.340
Mặc định Máy phun muối kiểm tra ăn mòn vật liệuSalt Spray TestersMáy phun muối kiểm tra ăn mòn vật liệuSalt Spray Testers

Hệ thống quảng cáo SangNhuong.com

Buồng phun sương muối kiểm tra ăn mòn vật liệu - Salt Spray Testers

Additional Info

Salt Spray tester Vexus SST series

LCD touch screen controller supports the continuous and intermittent testing.
Refilling water automatically when water level is insufficient.
The whole part of the device is made of Excellent PVC sheet and the inside of the device is reinforced by using a special lining material. Hence, it is sturdily made and will not transform forever.
The test chamber is heated from five directions in order to ensure the temperature difference in the chamber must be kept within±1 Celsius degree.
Spray nozzle: The nozzle is specially made to enable it to suck up the salt Water and then spray it out in the shape of mist with considerable high speed. When it falls on the surface of the item being tested , the difference of fallen mist must be controlled within±0.3ml per 80 square centimeter H.
HUNTER PRINCIPLE is used to make the saturated air hot and moist and to keep the humidity in the test chamber required for test.
  • Interior Volume: 108L, 270L, 480L, 800L, 1440L
  • Working Temperature Range: RT+10℃~60℃
  • Temperature Range of the Chamber: NSS ACSS 35℃±1℃ / CASS 50℃±1℃
  • Temperature Range of Saturated Air Tank: NSS ACSS 47℃±1℃/CASS 63℃±1℃
  • Temperature deviation: ≤2.0℃
  • Accuracy of Temperature: ±1℃

Salt Spray Tester ST series

Digital Display Time Controller 9.9S-9990HR ANLY AH5R.
Refilling water automatically when water level is insufficient.
The whole part of the device is made of Excellent PVC sheet and the inside of the device is reinforced by using a special lining material. Hence, it is sturdily made and will not transform forever.
The test chamber is heated from five directions in order to ensure the temperature difference in the chamber must be kept within±1 Celsius degree.
Spray nozzle: The nozzle is specially made to enable it to suck up the salt Water and then spray it out in the shape of mist with considerable high speed. When it falls on the surface of the item being tested , the difference of fallen mist must be controlled within±0.3ml per 80 square centimeter H.
HUNTER PRINCIPLE is used to make the saturated air hot and moist and to keep the humidity in the test chamber required for test.
Temperature is the pre-requisite condition that will have direct impact on corrosion rate . We use PID temperature control unit to limit the temperature difference within the range of ±1Celsius degree.
  • Interior Volume: 108L, 270L, 480L, 800L, 1440L
  • Working Temperature Range: RT+10℃~60℃
  • Brine concentration: 5%
  • Humidity Range: 95%~98% R.H
  • Salt fog Fall-out Rate: 1~2mL/80cm2 / hr
  • Pressure of Air Compressor: 1 ± 0.1kg /cm2
  • Temperature sensor: Platinum Resistance (PT-100)

NAMDUONG EQUIPMENT JSC.
Sales Manager: Mr. Thao
- Mob.: 0983 113 188
- Email: thao(a)thietbinamduong.com
- Redundancy: vudaothao(a)gmail.com
__________________
Cty in ấn tại Hà Nội, chuyên in decal pp giá rẻ và in poster lấy ngay sau 10 phút. LH 0979 407 447
Trả lời với trích dẫn


CHUYÊN MỤC ĐƯỢC TÀI TRỢ BỞI
Trả lời


Công cụ bài viết
Kiểu hiển thị

Quyền viết bài
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is Mở
Mặt cười đang Mở
[IMG] đang Mở
HTML đang Mở
Chuyển đến

SangNhuong.com


Múi giờ GMT +7. Hiện tại là 09:05 AM

SangNhuong.com xây dựng