hvn.kinhdoanh1
22-11-2016, 11:12 PM
Máy kiểm soát độ dẫn điện, máy đo & điều chỉnh độ dẫn điện EC mini Hanna BL 983327-1
Hãng: HANNA
Xuất xứ: Romania
Model: BL983327-1
Nguồn điện: 115V/230V
Bảo hành: 12 tháng
Giá: Liên hệ 0977.459.400
>>>Thiết bị hanna (http://thietbidohanna.com/)
Clarkson BL983327-1
Conductivity Mini Controller @ 10.00 mS/cm 12V DC
Hanna Instruments BL 983327-1
Description:
BL 983317 and BL 983327 are panel mounted mini controllers with an output relay, that has been designed for easy, affordable
installation in tight spaces, ideal for simple yet effective process control.
They are provided with automatic compensation for variations in temperature. The probe is easy-to-clean and requires very little
maintenance. The calibration is performed at 1 point, through a trimmer.
All wiring and connections to external devices are done through the terminals on the rear panel. The multicolor LED continuously
indicates if the controller is in measurement, dosing or alarm mode.
>>>Bộ điều khiển độ dẫn điện Hanna (http://thietbidohanna.com/may-kiem-soat-do-va-dieu-chinh-do-dan-dien-ec-hanna-134.html)
You can also choose automatic or manual dosing mode with a switch on the front panel. Manual control is particularly useful
during maintenance operations, because it permits you to enable or disable the dosing relay according to your need. The
overtime control system advises you when the relay is active too long, helping to prevent overdosing.
Models are available with power supply input at 115/230 Vac or 12 Vdc.
Specifications:
Range 0.00 to 10.00 mS/cm
Resolution 0.01 mS/cm
Accuracy ±2% F.S.
Probe HI 7632-00 (not included)
>>>Hanna BL 983327-1 (http://thietbidohanna.com/may-kiem-soat-do-va-dieu-chinh-do-dan-dien-ec-hanna/bo-kiem-soat-do-dan-dien-ec-hanna-bl-983327-1-889.html)
Temperature Compensation Automatic, 5 to 50°C (41 to 122°F) with ß = 2%/°C
Calibration manual, with CAL trimmer
Dosing Relay 1, max 2A (fuse protected), 250 Vac, 30 Vdc
contact closed when reading exceeds setpoint value
Setpoint adjustable from 0 to 10 mS/cm
Overtime adjustable, typically from 5 to approx. 30 minutes
Power Supply See Chart
Dimensions 83 x 53 x 99 mm (3.3 x 2.1 x 3.9")
Weight See Chart
Accessories:
Electrodes
HI 7632-00 Conductivity and TDS Probe
Solutions
HI 7031L 1413 µS/cm (µmho/cm)
1 x 500 mL bottle
HI 7039L 5000 µS/cm (µmho/cm)
1 x 500 mL bottle
HI 7061L General Purpose Cleaning Solution
1 x 500 mL bottle
Accessories
HI 710005 Voltage adapter from 115V to 12 Vdc (USA plug)
HI 710006 Voltage adapter from 230V to 12 Vdc (European plug)
HI 740146 Bracket for Installation of Process Meters
Order Information:
The BL 983327 is supplied with mounting brackets, transparent cover, and instructions.
Hãng: HANNA
Xuất xứ: Romania
Model: BL983327-1
Nguồn điện: 115V/230V
Bảo hành: 12 tháng
Giá: Liên hệ 0977.459.400
>>>Thiết bị hanna (http://thietbidohanna.com/)
Clarkson BL983327-1
Conductivity Mini Controller @ 10.00 mS/cm 12V DC
Hanna Instruments BL 983327-1
Description:
BL 983317 and BL 983327 are panel mounted mini controllers with an output relay, that has been designed for easy, affordable
installation in tight spaces, ideal for simple yet effective process control.
They are provided with automatic compensation for variations in temperature. The probe is easy-to-clean and requires very little
maintenance. The calibration is performed at 1 point, through a trimmer.
All wiring and connections to external devices are done through the terminals on the rear panel. The multicolor LED continuously
indicates if the controller is in measurement, dosing or alarm mode.
>>>Bộ điều khiển độ dẫn điện Hanna (http://thietbidohanna.com/may-kiem-soat-do-va-dieu-chinh-do-dan-dien-ec-hanna-134.html)
You can also choose automatic or manual dosing mode with a switch on the front panel. Manual control is particularly useful
during maintenance operations, because it permits you to enable or disable the dosing relay according to your need. The
overtime control system advises you when the relay is active too long, helping to prevent overdosing.
Models are available with power supply input at 115/230 Vac or 12 Vdc.
Specifications:
Range 0.00 to 10.00 mS/cm
Resolution 0.01 mS/cm
Accuracy ±2% F.S.
Probe HI 7632-00 (not included)
>>>Hanna BL 983327-1 (http://thietbidohanna.com/may-kiem-soat-do-va-dieu-chinh-do-dan-dien-ec-hanna/bo-kiem-soat-do-dan-dien-ec-hanna-bl-983327-1-889.html)
Temperature Compensation Automatic, 5 to 50°C (41 to 122°F) with ß = 2%/°C
Calibration manual, with CAL trimmer
Dosing Relay 1, max 2A (fuse protected), 250 Vac, 30 Vdc
contact closed when reading exceeds setpoint value
Setpoint adjustable from 0 to 10 mS/cm
Overtime adjustable, typically from 5 to approx. 30 minutes
Power Supply See Chart
Dimensions 83 x 53 x 99 mm (3.3 x 2.1 x 3.9")
Weight See Chart
Accessories:
Electrodes
HI 7632-00 Conductivity and TDS Probe
Solutions
HI 7031L 1413 µS/cm (µmho/cm)
1 x 500 mL bottle
HI 7039L 5000 µS/cm (µmho/cm)
1 x 500 mL bottle
HI 7061L General Purpose Cleaning Solution
1 x 500 mL bottle
Accessories
HI 710005 Voltage adapter from 115V to 12 Vdc (USA plug)
HI 710006 Voltage adapter from 230V to 12 Vdc (European plug)
HI 740146 Bracket for Installation of Process Meters
Order Information:
The BL 983327 is supplied with mounting brackets, transparent cover, and instructions.